Italy Aluminum Filter -sales@aluminiumceramicfiber.com

The Italy aluminum filter casting plant uses foam and high purity ceramics as raw materials to effectively remove the non-metallic solid mixture of molten aluminum and aluminum alloy flux in the aluminum casting industry.

Ceramic foam filter Al2O3 is specially designed for casting metal. Due to the formation of a “filter cake” on the side of the inlet filter and due to the deep filtration inside the ceramic matrix.

Italy Aluminum Filter

Alumina ceramic foam filters are mainly used for the purification of aluminum and aluminum alloy. With the improvement of quality requirements for aluminum products, the application of filter foundry will be more and more extensive.

Ceramic foam filter

660x660x50（26“）

584x584x50（23“）

508x508x50（20“）

432x432x50（17“）

381x381x50（15“）

305x305x50（12“）

228x228x50（9“）

178x178x50（7“）

Ceramic foam clamp hole size (PPI): 10/20/30/40/50/60

Italian aluminium filter foundry

The alumina function of the Italian aluminium filter foundry is limited by the open 3D structure of the ceramic matrix created by the interconnection unit system. They have good thermal conductivity, stability and resistance to sudden temperature changes.

The advantages of Adtech ceramic foam filter for producing aluminum castings are:

Uniform pore size, high porosity, proper sintering, high bending and compressive strength and effective filtration.

Alcoa has purchased the Adtech filter foundry for continuous casting, semi continuous casting, gravity casting and low pressure casting aluminum flux filter equipment.

The technicians of Italy aluminum industry think that ceramic foam filter is an effective tool to realize metallurgical purity of molten metal in casting process. The filter also stabilizes the filling of the mold, thereby preventing undesirable defects in the casting.